The Autoset system makes it possible to set up the press automatically to work with each of the dies used (up to 100 dies). Programming You key in the settings of the machine’s parameters for each die, stroke, maximum and minimum speed, die height for clamping, working height of die, etc. on the programming screens. The strip feed parameters can also be set: advance angles, piloting or unclipping angles, length of advance, etc. You can also program die safeties: Control of advance, control of ejection of pieces, internal die actions, ejection and blowing actions, etc. Working On the working screen you program the total production and batch values. It is possible to change the programmed settings and view simultaneously the programmed and real values. Diagnosis This allows you to monitor the working conditions of the various systems: clutch-brake, lubrication, hydraulic overload, die fixing, emergencies, safety barriers, die safeties, etc. and indicate malfunctions and reasons for stoppages. Teleservice We can offer this option so that our technical support 𠇌ll centre” can make a remote diagnosis by connecting into the PLC via modem, even when the machine is in motion, so as to view and modify the program of the PLC. The customer will have to provide an analogical telephone line connection for this communication. Options Arisa offers various standard levels of Autoset systems. A minimum level is included on the standard machine, in all presses supplied, but Arisa recommend the best level for each machine depending on customer needs.